Vivitar Infrared Wireless Shutter Release Remote Control Nikon DSLR Cameras

(No reviews yet) Write a Review
Calculated at Checkout

Product Overview

Untitled 13

Wireless Remote Control


Compatible NIKON Models:

Untitled 2




Nikon D1 Nikon D2X Nikon D3S Nikon D60
Nikon D100 Nikon D2Xs Nikon D3X Nikon D70
Nikon D1H Nikon D3 Nikon D40 Nikon D700
Nikon D1X Nikon D4 VCC113 Nikon D7000
VCC113 Nikon D300 Nikon D40x VCC113
Nikon D200 Nikon D3000 Nikon D50 Nikon D70s
Nikon D2H Nikon D300S Nikon D5000 Nikon D80
Nikon D2Hs Nikon D3100 Nikon D5100 Nikon D90
Nikon D800 VCC113 VCC113 Nikon E3
VCC113 VCC113 03-2012 Nikon NASA F4

DSLR Cameras with remote control functions

  • For first time use, please pull out the plastic separator at the battery holder

  • Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.

  •  Aim the transmitter in the remote control at the infrared receiver on the camera (usually within +/- 20 degree of the lens axis, from the left to the right and from the top to the bottom) and press the shutter-release button on the remote control (when using remote outdoors, make sure that the subject is not backlit and that the line of site between the transmitter and the infrared receiver is not blocked by the lens or other obstacles).

  • How the camera focuses and shoots depends on the option selected for your camera's custom setting. For further information, check you camera's manual.

  • Infrared can't be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.

  • CARE AND STORAGE: When the remote control is not in use for an extend period of time, please remove the battery from the remote control. Do not leave the remote control in any place exposed to excessive heat, or humidity.

Size: 2.5" x 0.25" ( 6.35cm x 0.66cm ) 100% Compatible with other infrared remote controls
Works with all remote shutter release control modes Easy-to-replace lithium battery 
Typical Battery Life: up to 3 years, 20,000 exposures Operating temperature: 40 °F to 105 °F 


(No reviews yet) Write a Review